Medium-Duty Portable Flooring System
Ideal for large-scale tent, stadium and special event flooring.
UltraDeck 1 (EDU1) is a modular medium-duty natural turf protection system. It is designed to offer a greater level of protection, rigidity, and weight loading capability than Signature’s EventDeck 1 system. This product is ideal for applications where equipment, light vehicles, pneumatic tire forklifts and generally more traffic is expected.
UltraDeck can also be used for temporary accessways or pathways on rough and uneven terrain. EDU1 is rugged enough to stage trailers, equipment and utility vehicles. Ideal for military use, UltraDeck provides a firm, comfortable floor for operations, communication, personnel and hospital tents while providing protection for the natural turf underneath.
UltraDeck modules are significantly larger in size and thickness than our general purpose EventDeck and EDU1’s wall thickness, surface thickness and connector size have been increased substantially to make EDU1 more robust and heavier duty.
Each UltraDeck 1 module is 24” x 12” x 1-1/8” and ships in pre-assembled 3’ x 4’ sheets for quicker installs and dismantles.
UltraDeck1 offers superior natural turf protection
UltraDeck was specifically engineered to provide optimal natural grass protection during special events, such as tent events, concerts or festivals, and to minimize wear and tear.
UltraDeck portable flooring is ideal for use over all types of natural turf, including cold weather grasses such as Kentucky Blue Grass and warmer weather varieties such as Bermuda Grass.
EDU1 is quick and simple to install without tools or other equipment
Installation is quick and does not require trained personnel, special tools or an instruction manual. A full-size 80,000 sq/ft stadium can be installed in 4-6 hours using 20 workers.
Modules can be connected in both directions and at any module connection point, including at a 90 degree angle - allowing for maximum flexibility in floor design. The underside of the module features a specially designed multi-directional cable channel to neatly thread power and communication wiring and rope lighting.
Create a flat, lay down floor with UltraDeck 1
The system is meant as a true substitute for lay down and built-up plywood floors. It provides a rigid and uniform feel underfoot that is suitable for upscale, high-end events.
Unlike other modular plastic floors, UltraDeck can be laid straight down on most ground surfaces, leveled with plywood stringers and shims, or raised on multiple layers of stringers as required.
By raising UltraDeck on 2" x 6" or 2" x 8" plywood boards (stringers), it is possible to create a perfectly level, raised floor. Use standard plywood stringers spaced one (1) foot on center. Additional layers of stringers may be used to raise UltraDeck even further off the ground. Shims may be used to level stringers and the floor.
UltraDeck is ideal for pole tents, frame tents, and clearspan structures. It provides an attractive and event-friendly look, which often doesn’t need to be covered with carpet.
When placed on level ground or on plywood stringers, UltraDeck can support the weight of scissor lifts, forklifts with pneumatic tires, and light trucks. This makes UltraDeck ideal for larger tents, where equipment is required for the hanging of lighting, placement of decorations, and transport of equipment.
With the ability to be raised off of the ground, UltraDeck is a true substitute to costly wood. Unlike wood, it will not warp, get waterlogged, or rot. Additionally, with UltraDeck there is no need to use dangerous screws or nails as modules self connect and do not need to be screwed down to the plywood stringers.
As with EventDeck, carpet and Astroturf may be stapled directly to UltraDeck for more upscale and formal events.
UltraDeck is simple to clean and maintain. Damaged sections are easily removed and replaced.
This product’s superior engineering puts it at the forefront of quality, performance, ease of installation and affordability.
Industry-Leading Expansion Joint
All plastic flooring materials will expand and contract during fluctuating temperature conditions. In plastic modular floors, this “thermal expansion” phenomenon can result in floors warping, buckling, disconnecting or otherwise becoming uneven.
The UltaDeck Expansion Joint is designed to accommodate natural expansion caused by thermal fluxuation.